Soja Wax

KeraSoy Pillar .
is suitable for further mixing with fragrance oils and oil-soluble dyes.
no animal tests have been carried out in the manufacture.
Due to the presence of genetically modified soybean crops on the market, we are
unable to guarantee completely non-GMO sources, but the manufacturer aims to use non-GMO sources
whenever possible.

KeraSoy Pillar does not require additives, apart from fragrance and colour, if desired. It is
advisable not to heat the wax above 85 °C or heating for a long time.
Wax should be stored in a cool, dry place away from direct heat, sunlight and
moisture.

Most dyes work with KeraSoy Pillar. When you use
powder dyes, the wax is heated to approx. 75 °C, the dye is added and mixed until dissolved.

KeraSoy Pillar is designed for fragrance at levels between 5 – 10%.

Natural waxes tend to require larger wick sizes than traditional paraffin waxes.
Scent and color have a big influence on the best wick choice, so always do tests on wicks if you add a different color or scent.

Temporary high temperatures (up to 90 °C) have no negative effect as long as the wax
is cooled quickly again. Higher temperatures can cause the wax to discolour. Allow
the wax to cool to your desired filling temperature, add the fragrance and mix well.

The filling temperature can vary according to the type and size of the mold. We recommend filling at a temperature of around 55 – 65 °C.

Cool the candles at room temperature (approx. 25 °C). The candles must be undisturbed for 48 hours before trial burning.